Home ABS Acetals Delrin® Acrylic Acetate & CAB Buna Rubber Carbon Fiber Ceramics CPVC ECTFE
EVA Ertalyte® PET-p ETFE - Tefzel® FEP Fiberglass Fluran® Graphite HDPE HIPS-Polystyrene Hytrel® Sheets
Kevlar® Kydex® Lexan® LDPE LLDPE MDPE Tubing Neoprene Nomex® Films Norprene® Tubing Noryl®
Nylon Nylatron® PBT PCTFE Peek Petg PFA Pharmed® Tubing Plexiglas® Phenolics Laminates
Polycarbonate Polyester Polypropylene Polystyrene Polysulfone Polyurethane PTFE PVC PVDF Rubber
Rulon® Santoprene® Silicone TPX Tygon® Tygothane® UHMWPE Ultem® Welding Rods Versilic®
Zelux® Metal Balls Sales Policy Contact Us Privacy          

 

G10/FR4 Glass Reinforced Laminate Tubes, Rods and Sheets

(Micarta) (High Pressure Laminates) G10/FR4 Glass Reinforced Epoxy (yellowish to light green) G10/FR4 Technical Data Sheet    G10/FR4 Chemical Resistance Chart
The most versatile all-around laminate and composite, this grade is a continuous glass woven fabric base impregnated with an epoxy resin binder. It has extremely high mechanical strength, good dielectric loss properties, and good electric strength properties, both wet and dry.  NEMA grades G10 and FR4 Glass-Cloth Reinforced Epoxy -- natural color is typically a yellowish to light green. The most versatile all-around laminate grades are continuous glass woven fabric impregnated with an epoxy resin binder. (Epoxy resins are among the most versatile and widely used plastics in the electronics field, primarily because water absorption is virtually nil, rendering it an outstanding insulator. Beyond its electrical insulating properties, epoxy resins exhibit superior adhesive properties and great dimensional stability -- shrinkage is usually less than 1 percent.) G10/FR4 has extremely high mechanical strength, good dielectric loss properties, and good electric strength properties, both wet and dry. The main difference between NEMA Grades G10 and FR4 is that FR4 is a fire retardant grade of G10. Therefore, FR4 can be safely substituted where G10 is called for, while G10 can never be substituted where FR4 is called for. (G10 certifies to Mil-I-24768/2 GEE; FR4 certifies to Mil--24768/27 GEE-F.) NEMA grades G11 and FR5 Glass-Cloth Reinforced Epoxy -- natural color is typically yellow green to amber. This grade is similar to G10/FR4 with the addition of a higher operating temperature and some improved mechanical strength at elevated temperatures

 

Grade NEMA FR-4 certs to MIL-I-24768/27 GEE-F, IPC 4101/21, IEC 60893-3 Type 2 EP GC 202

G10/FR4 Sheets G10/FR4 Tubes G10/FR4 Rods 
G10/FR4 Bar Cyrogenic G10/FR4 Sheets G10/FR4 Glass Filled 30% Sheet
Copper Clad G10/FR4 Sheets Carbon Filled G10/FR4 Sheets PTFE Filled G10/FR4 Sheets
Static Dissipative G10/FR4 Sheets Kevlar Filled G10/FR4 Sheets

G10/FR4 90 Degree Angles

 

HDPE Colored Sheets

Polycarbonate Tubes

Thermoset Phenolics

 

UHMW

 

 

 

      

Compare Technical Differences on Plastic Properties

 

K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548 

Privacy   Contact Kmac Plastics    Domestic Selling Policy

616-406-0671

  616-406-0682 fax