|
KETRON®
PEEK 30% CF (CM)
|
Property |
Method |
Unit |
Value |
|
Mechanical |
|
Specific Gravity, 73F |
D792 |
|
1.42 |
|
Tensile Strength, 73F |
D638 |
psi |
18,000 |
|
Tensile Modulus of Elasticity, 73F |
D638 |
psi |
800,000 |
|
Elongation, 73F |
D638 |
% |
2.0 |
|
Flexural Strength, 73F |
D790 |
psi |
30,000 |
|
Flexural Modulus, 73F |
D790 |
psi |
1,300,000 |
|
Compressive Strength, 10% Def., 73F |
D695 |
psi |
25,000 |
|
Compressive Modulus of Elasticity, 73F |
D695 |
psi |
550,000 |
|
Hardness, Rockwell, Scale as noted, 73F |
D785 |
|
M97 (R125) |
|
Hardness, Durometer, Shore D scale, 73F |
D2240 |
|
D86 |
|
Izod Impact (notched), 73F |
D256 Type A |
ft-lb/in |
1.4 |
|
Coefficient of Friction (Dry vs Steel) Dynamic |
PTM55007 |
|
0.24 |
|
Limiting PV, 73F |
PTM55007 |
psi-fpm |
41,000 |
|
k (wear) factor |
PTM55010 |
|
160 |
|
Thermal |
|
Coefficient of linear Thermal Expansion |
E-831(TMA) |
in/in/F |
1.70x10-5 |
|
Deflection Temperature 264 psi |
D648 |
F |
450 |
|
Melting Point (crystalline) peak |
D3418 |
F |
644 |
|
Continuous Service Temperature in Air (Max.) |
|
F |
480 |
|
Thermal Conductivity |
|
BTU-in/(hr-ftF) |
6.37 |
|
Electrical |
|
Surface Resistivity |
EOS/ESD S11.11 |
Ohm/square |
>10-5 |
|
Chemical |
|
Acids, Weak, 73F/23C, acetic acid, dilute hydrochloric or sulfuric |
Acceptable Service |
|
Acids, Strong, 73F/23C, conc. hydrochloric or sulfuric |
Limited Service |
|
Alkalies, Weak, 73F/23C, dilute ammonia or sodium hydroxide |
Acceptable Service |
|
Alkalies, Strong, 73F/23C, conc. ammonia or sodium hydroxide |
Acceptable Service |
|
Hydrocarbons-Aromatic, 73F/23C, benzene, toluene |
Acceptable Service |
|
Hydrocarbons-Aliphatic, 73F/23C, gasoline, hexane, grease |
Acceptable Service |
|
Ketones, Esters, 73F/23C, acetone, methyl ethyl ketone |
Acceptable Service |
|
Ethers, 73F/23C, diethyl ether, tetrahydrofuran |
Acceptable Service |
|
Chlorinated Solvents, 73F/23C, methylene chloride, chloroform |
Acceptable Service |
|
Alcohols, 73F/23C, methanol, ethanol, anti-freeze |
Acceptable Service |
|
Inorganic Salt Solutions, 73F/23C, sodium chloride, potassium
cyanate |
Acceptable Service |
|
Continuous Sunlight, 73F/23C |
Acceptable Service |
|
Miscellaneous |
|
Water Absorption Immersion, 24 hr |
D570 |
% |
0.15 |
|
Water Absorption Immersion, Sat. |
D570 |
% |
0.50 |
|
Outgassing TML (Total Mass Loss) |
E595 |
% |
0.30 |
|
CVCM (Collected Volatile Condensable Material) |
E595 |
% |
0.00 |
|
WVR (Water Vapor Regained) |
E595 |
% |
0.00 |
|
Compliance |
|
UL94 |
|
|
V-0 |
|